3D MODEL
turn this into a straw topper for a 7mm straw. the straw should be able to insert 10mm, the tail part behind ears should staydo not put all the squiggly lines on it just leave the stripes. keep it flat on both sides
ATTRIBUTION
This model is licensed under Creative Commons Attribution 4.0 International (CC BY 4.0). You are free to download, 3D print, remix, and redistribute it — including for commercial use — as long as you credit the creator.
SUGGESTED CREDIT
“turn this into a straw topper for a 7mm straw. the straw should be able to insert 10mm, the tail part behind ears should staydo not put all the squiggly lines on it just leave the stripes. keep it flat on both sides” by Rhonda Thomley, generated with Automatic3D, licensed CC BY 4.0 — https://www.automatic3d.com/m/turn-this-into-a-straw-topper-for-a-7mm-straw-the-zy0ma8
ABOUT THIS MODEL
Generated from the creator's reference photos and a text prompt using Automatic3D's photo-to-3D pipeline. The model is a 3D-printable STL file suitable for FDM, resin, or SLS printers. No model cleanup or post-processing was required — the output here is what the creator got back from the generator.
Want to make your own? Describe an object in plain English — or upload reference photos — and get a printable STL in about a minute. The free tier includes 3 models and 12 concept generations per month.