3D MODEL
generate a challenge coin rack, I want it to be a hexagon with 4 tiers 20mm each tier, and slots that are 5mm wide b2 5mm deep spanning all top surfaces and centered in each tier, make each tier gradually smaller by 20mm, connecting all the 5mm coin slots in their rows to wrap around the model, making the bottom tier as large as can fit on a 260x260x260mm printer connect all the coin slots on their tiers, remove the line going through each side up to the next one
ATTRIBUTION
This model is licensed under Creative Commons Attribution 4.0 International (CC BY 4.0). You are free to download, 3D print, remix, and redistribute it — including for commercial use — as long as you credit the creator.
SUGGESTED CREDIT
“generate a challenge coin rack, I want it to be a hexagon with 4 tiers 20mm each tier, and slots that are 5mm wide b2 5mm deep spanning all top surfaces and centered in each tier, make each tier gradually smaller by 20mm, connecting all the 5mm coin slots in their rows to wrap around the model, making the bottom tier as large as can fit on a 260x260x260mm printer connect all the coin slots on their tiers, remove the line going through each side up to the next one” by Sam Elliott, generated with Automatic3D, licensed CC BY 4.0 — https://www.automatic3d.com/m/generate-a-challenge-coin-rack-i-want-it-to-be-a-e3iq38
ABOUT THIS MODEL
Generated from a text prompt using Automatic3D's text-to-3D pipeline. The model is a 3D-printable STL file suitable for FDM, resin, or SLS printers. No model cleanup or post-processing was required — the output here is what the creator got back from the generator.
Want to make your own? Describe an object in plain English — or upload reference photos — and get a printable STL in about a minute. The free tier includes 3 models and 12 concept generations per month.