3D MODEL
Create one decorative cover plate for a standard US single-gang duplex outlet. Use the uploaded image as the ornament reference. Place the top ornament's fan-shaped shell and mirrored scrolls along the top edge. Adapt the bottom ornament into a centered shell at the bottom and curling acanthus leaves rising along both sides. Blend the relief into one vertical rectangular plate with a flat back and a smooth center panel. Add two vertically stacked through-cutouts shaped to fit the full faces of a standard US duplex receptacle, with one small round mounting screw hole centered between them. Keep all openings clear. Show a straight-on front view of the plate alone in matte ivory. Omit the receptacle, screw, wall, text, and screenshot interface. Model the ornament as raised 3D geometry and export one watertight STL in millimeters.
ATTRIBUTION
This model is licensed under Creative Commons Attribution 4.0 International (CC BY 4.0). You are free to download, 3D print, remix, and redistribute it — including for commercial use — as long as you credit the creator.
SUGGESTED CREDIT
“Create one decorative cover plate for a standard US single-gang duplex outlet. Use the uploaded image as the ornament reference. Place the top ornament's fan-shaped shell and mirrored scrolls along the top edge. Adapt the bottom ornament into a centered shell at the bottom and curling acanthus leaves rising along both sides. Blend the relief into one vertical rectangular plate with a flat back and a smooth center panel. Add two vertically stacked through-cutouts shaped to fit the full faces of a standard US duplex receptacle, with one small round mounting screw hole centered between them. Keep all openings clear. Show a straight-on front view of the plate alone in matte ivory. Omit the receptacle, screw, wall, text, and screenshot interface. Model the ornament as raised 3D geometry and export one watertight STL in millimeters.” by Mike Sim, generated with Automatic3D, licensed CC BY 4.0 — https://www.automatic3d.com/m/create-one-decorative-cover-plate-for-a-standard-h8np08
ABOUT THIS MODEL
Generated from the creator's reference photos and a text prompt using Automatic3D's photo-to-3D pipeline. The model is a 3D-printable STL file suitable for FDM, resin, or SLS printers. No model cleanup or post-processing was required — the output here is what the creator got back from the generator.
Want to make your own? Describe an object in plain English — or upload reference photos — and get a printable STL in about a minute. The free tier includes 3 models and 12 concept generations per month.